Halogen Rapid Moisture Analyzer terutama digunakan untuk mengukur kadar air teh dan makanan lainnya, dengan akurasi 0,01%. Pengukur kadar air berukuran kecil dan cepat dalam pengukuran, yang cocok untuk berbagai tanaman teh
Mesin pembentuk teh tipe datar terutama untuk LongJing Tea, melalui program kontrol komputer, proses operasi manual seperti pemberian teh, fiksasi, pembentukan datar, pemolesan diubah menjadi kontrol komputer, sehingga kemerataan setiap kumpulan teh dapat disesuaikan dan dikendalikan
Mesin penggulung teh DL-6CRT-75 memiliki aksi ganda, terutama untuk memutar teh, diameter drum 75cm, kapasitas sekitar 120 kg per batch.
DL-6CQFJ-70 digunakan untuk menyortir daun segar yang dipetik oleh pemanen teh, dapat memisahkan ukuran teh yang berbeda untuk menghasilkan kualitas teh yang berbeda.
DL-CRQ-20Z CTC teh hitam HRS Gyrovane mesin rotorvane terutama digunakan untuk memproses teh hitam CTC.
DL-6CYQT-90250 terutama digunakan untuk pengolahan teh Oolong, drum yang terbuat dari bambu, aktivitas teh layu ditingkatkan dengan mengocok, Dapat membuat rasa teh lebih harum, Kapasitas sekitar 120 kg per batch.
DL-6CHL-RQ10 adalah mesin pengering teh tipe kecil, dapat mengeringkan semua jenis teh, menggunakan pemanas gas, kapasitas dari 40kg hingga 600kg per jam, suhu dan kecepatan dapat disesuaikan, keamanan, hemat energi, dan perlindungan lingkungan
DL-6CHZ-9QB adalah dehidrator teh stainless steel penuh, pemanas listrik, area pengeringan sekitar 10 meter persegi, kapasitas 27-45 kg per batch.
Karena daun teh yang baru dipetik memiliki kelembapan lebih dan bau rumput lebih menyengat, mereka perlu ditempatkan di ruangan yang sejuk dan berventilasi untuk layu. Setelah layu, kadar air daun teh berkurang, daun menjadi lunak, dan bau berumput hilang. dan aroma daun teh terungkap, yang kondusif untuk pemrosesan selanjutnya, seperti fiksasi, puntiran, fermentasi, dll. Warna, rasa, dan kualitas teh hijau yang dibuat lebih baik daripada teh tanpa pelayuan.
Spread out the tea leaves on the ground (need to lay a layer of plastic cloth, etc. to prevent tea leaves from directly contacting the ground). This method is the most primitive and the simplest method. Advantages: save money, less trouble, hardly need any input, about 2.5 kg/㎡ of tea leaves can be placed Disadvantage: It is only suitable for the production of small batches of tea. If large quantities of tea leaves are produced, the required space is very large; if it encounters rainy weather, it can only be placed in the room to wither.
Place the fresh leaves on the withering racks, each withering rack has 20 layers, and each layer has a whole bamboo sieve tray. There are mesh holes on the sieve tray to facilitate air flow. At the same time, bamboo strips can absorb water, increase the rate of water evaporation, and accelerate the speed of tea leaves withering. Advantage: Small footprint; each withering tray can hold 2.5 kg of fresh leaves, and each shelf (about 1.2 square meters) can hold 50 kg of fresh leaves, which greatly saves space; at the same time, the withering tray is made of bamboo, which is clean, hygienic and environmentally friendly . There is a pulley at the bottom of the machine, which makes it easier to move.
Put the fresh leaves on the withering machine. The withering machine can place 40 kg of tea leaves per square meter. The machine can blow air from the bottom of the tea leaves, which can adjust the temperature of the wind, greatly increasing the withering speed of the tea leaves. Advantages: Small area, hot air can be blown in, greatly improved the withering speed (efficiency increased by about 70%) Disadvantages: The machine needs to be heated, the power is about 15kw, and it needs to be connected to a 380V power supply.